Oracle904InstalOnRedHatAS3

　　
---------------------------MAKE RAID DISK STORAGE----------------------
STEP 1 :
FOLLOW AS THE HINT,PRESS CTRL-M,START TO CONFIG RAID
STEP 2 :
MAKE 3 RAIDS :1 DISK,1 DISK ,4 DISKS.

---------------------install AS3 operation system in IDE------------------------

step 1:
in installing we choose chinese simplified language package,
step 2:
set operation system default language is us english
step 3:
in install package,wo choose develope package and ftp package

FINISH THE OPERATION SYSTEM INSTALL
--------------------

--------------------fdisk and partition----------------------------------------
step 1
fdisk /dev/sda
n-->p--->1--->return---->+20000M
n-->p--->2--->return---->+20000M
n-->p--->3--->return---->return--->w
fdisk /dev/sdb
n-->p--->1--->return---->return---->w
fdisk /dev/sdc
n-->p--->1--->return---->+40000M
n-->p--->2--->return---->return---->w
mkfs.ext3 /dev/sdc1
mkfs.ext3 /dev/sdc2
step 2
raw /dev/raw/raw1 /dev/sda1
raw /dev/raw/raw2 /dev/sda2
raw /dev/raw/raw3 /dev/sda3
raw /dev/raw/raw4 /dev/sdb1
step 3
 add  command into /etc/rc.d/rc.local
raw /dev/raw/raw1 /dev/sda1
raw /dev/raw/raw2 /dev/sda2
raw /dev/raw/raw3 /dev/sda3
raw /dev/raw/raw4 /dev/sdb1
chown oracle /dev/raw/raw1
chown oracle /dev/raw/raw2
chown oracle /dev/raw/raw3
chown oracle /dev/raw/raw4

mount -t tmpfs /dev/tmpfs /oradata/bcp_for_ora/m0 -o size=500m

step 4
mkdir /oracle /oradata
step 5
mount /dev/sdc1 /oracle
mount /dev/sdc2 /oradata
it may like this
/********************************************************************/

LABEL=/             /                    ext3    defaults        1 1
LABEL=/boot      /boot             ext3    defaults        1 2
none                /dev/pts             devpts  gid=5,mode=620  0 0
none                /proc                  proc    defaults        0 0
none                /dev/shm             tmpfs   defaults        0 0
LABEL=/swap /swap                 ext3    defaults        1 2
/dev/sdc1          /oracle               ext3    defaults        0 0
/dev/sdc2          /oradata              ext3    defaults        0 0
/********************************************************************/


step 6
add the above two commands into /etc/fstab


------------------------------------------------------------------------------
   INSTALL ORACLE

*-----------------------
*notation!!!! as3 linux install must include developer rpms
*-----------------------
===========================================
Step 1.
 Add user and group
===========================================
groupadd dba
groupadd oinstall
useradd -g oinstall -G dba oracle
passwd oracle

mkdir /oracle
mkdir -p /oracle/ora9/product/
chown oracle.oinstall /oracle
chown -R oracle.oinstall /oracle/ora9
chmod 755 /oracle
chown -R oracle.oinstall /oradata /dev/raw/raw1 /dev/raw/raw2 /dev/raw/raw3 /dev/raw/raw4

===========================================
Step 2.
 Append these lines to
  /etc/sysctl.conf to set kernel parameters:
===========================================

kernel.shmmax = 1073741824
kernel.shmmni = 4096
# *******************************
kernel.shmall = 2097152 
#********************************
kernel.sem    = 250 32000 100 128
fs.file-max   = 65536

net.ipv4.ip_local_port_range = 1024 65000

 

===========================================
Step 3.
 Append these lines to
 /etc/security/limits.conf to
 modify your resource limits:
===========================================

oracle soft nofile 65536
oracle hard nofile 65536
oracle soft nproc 16384
oracle hard nproc 16384

===========================================
Step 4.

===========================================
echo 250 32000 100 128 > /proc/sys/kernel/sem
echo 1073741824 > /proc/sys/kernel/shmmax
echo 4096 > /proc/sys/kernel/shmmni
echo 2097152 > /proc/sys/kernel/shmall
echo 65536 > /proc/sys/fs/file-max
echo 1024 65000 > /proc/sys/net/ipv4/ip_local_port_range

 

===========================================
Step 5.
 Go into the ./rpms directory and
Add the neccessory runtime file
===========================================

rpm -ivh compat-libstdc++-7.3-2.96.122.i386.rpm
rpm -ivh compat-libstdc++-devel-7.3-2.96.122.i386.rpm

rpm -ivh compat-db-4.0.14-5.i386.rpm
rpm -ivh compat-gcc-7.3-2.96.122.i386.rpm
rpm -ivh compat-gcc-c++-7.3-2.96.122.i386.rpm

rpm -ivh tcl-8.3.5-92.i386.rpm
rpm -ivh setarch-1.3-1.i386.rpm
rpm -ivh openmotif-2.2.2-16.i386.rpm

 


===========================================
Step 6.
 Change compiler's settings
===========================================
mv /usr/bin/gcc /usr/bin/gcc323
ln -s /usr/bin/gcc296 /usr/bin/gcc
mv /usr/bin/g++ /usr/bin/g++323
ln -s /usr/bin/g++296 /usr/bin/g++

 


===========================================
Step 7.
 Unzip the compressed install file
Notice:
1. Copy the three install file into oracle's home
2. change the owner and group to oracle and oinstall

===========================================
chgrp oinstall lnx*
chown oracle lnx*

cpio -idmv <lnx_920_disk1.cpio
cpio -idmv <lnx_920_disk2.cpio
cpio -idmv <lnx_920_disk3.cpio


===========================================
Step 8.
 Unzip the compressed install file
===========================================
unzip p3006854_9204_LINUX.zip
cd 3006854
sh rhel3_pre_install.sh

NOTE: If you get the following error when you run rhel3_pre_install.sh:
  rhel3_pre_install.sh: line 36: gcc: command not found
Then you forgot to install or link gcc, see above. This means you can't start any binaries any more:
# ls
ls: error while loading shared libraries: /etc/libcwait.so: cannot op